CI
Senior Electrical Engineer
Accepting applicationsCryomagnetics, Inc. · Oak Ridge, TN
Full-Time Mid_senior AIC++EthernetUSBanalog
Posted
20h ago
Category
Design
Experience
Mid_senior
Country
United States
Electrical Engineer (Instrumentation & Embedded Systems)
Cryomagnetics, Inc. | Oak Ridge, TN | Full-time, on-site
About Cryomagnetics
We've built superconducting magnets and cryogenic systems in Oak Ridge for more than 40 years. Our systems end up in universities, national labs, and industrial facilities worldwide. We enable research for cyclotron resonance, ion trapping, materials science, medical devices, quantum computing, energy, gyrotron development, and more. We pioneered cryogen-free magnet systems and build nearly everything in-house, seeing projects through from design to delivery.
The role
Alongside our magnet systems, we design and manufacture the electronic instruments that run them. Magnet power supplies, cryogenic temperature monitors, cryogen level meters, gaussmeters, and custom electronics for clients whose applications don't fit anything off the shelf.
This role owns that portfolio. You'll have the opportunity to maintain and advance the hardware, firmware, and/or host software across our instrument lines, carrying designs forward as components go obsolete, requirements change, and customers ask for capability that doesn't exist yet. You'll report to the Engineering Manager.
This is a broad role in a small company. The same person who traces a noise problem on a bench in the morning may be writing SCPI command handlers in the afternoon.
What you'll do
Design and revise analog, digital, and mixed-signal circuits for precision measurement and control instruments
Develop low-level embedded firmware for instrument control, measurement, and communication, including device drivers
Implement, maintain, and extend host-side software and instrument drivers used by our customers
Carry existing designs forward through component obsolescence, cost reduction, and capability upgrades
Design and build custom instrumentation for one-off customer applications
Support production, calibration, and end-of-line test for the instrument lines
Troubleshoot field returns and drive corrective action back into the design
Maintain schematics, PCB files, firmware repositories, and design documentation
Required Qualifications
Bachelor of Science in Electrical Engineering from an EAC/ABET-accredited program
5+ years of professional experience designing electronic products, ideally in an environment where you participated in either a full New Product Development (NPD) cycle or Engineering Validation Testing (EVT), Design Validation Testing (DVT), and Production Validation Testing (PVT) cycle
Demonstrated analog and mixed-signal circuit design, including precision measurement front ends, signal conditioning, and power regulation
Schematic capture and multilayer PCB layout in a professional EDA tool such as Altium or OrCAD
Embedded firmware development in C or C++ on microcontrollers, including peripheral configuration, bootstrap coding, real-time control loops, serial communication
Practical lab skill with oscilloscopes, DMMs, function generators, and power analyzers, and the debugging instinct to use them well
Strong Microsoft Office skills, particularly Excel for test data
Attention to detail that holds up in released schematics, firmware, and calibration procedures
Able to work on-site in Oak Ridge, TN full time
Preferred Qualifications
Experience with cryogenics, superconducting magnets, high vacuum, or low-temperature instrumentation
Precision measurement work, including low-noise design, four-wire sensing, high-resolution ADCs, precision references, and sensor linearization
Power electronics for programmable current sources or supplies, including regulation loops, thermal design, and protection circuitry
Instrument communication interfaces and command sets, such as SCPI over RS-232, USB, GPIB/IEEE-488, or Ethernet
EMI/EMC design practice and product safety compliance such as IEC 61010 or CE marking
Embedded firmware development
Experience taking over and modernizing designs
Git or comparable version control for both firmware and hardware
Practical LLM use in a technical context
Growth and tooling
You'll have real ownership here, and a product portfolio small enough to actually understand end to end. That combination is hard to find, and it's the reason engineers stay in roles like this. Superconducting magnet and cryogenic measurement work also builds domain expertise that few employers can teach. We encourage practical use of our internal AI tooling for design, firmware, and documentation work, within defined procedures for handling proprietary design data. Performance is reviewed at six months, at twelve months, and annually after that, with pay and responsibilities moving alongside demonstrated capability.
Compensation and benefits
Salary is dependent on experience, full-time exempt. Health, dental, vision and life insurance, 401(k) contribution matching, and a competitive PTO policy.
Send your resume and cover letter to [email protected]. This is the preferred application method over applying directly on LinkedIn.
Show more Show less
Cryomagnetics, Inc. | Oak Ridge, TN | Full-time, on-site
About Cryomagnetics
We've built superconducting magnets and cryogenic systems in Oak Ridge for more than 40 years. Our systems end up in universities, national labs, and industrial facilities worldwide. We enable research for cyclotron resonance, ion trapping, materials science, medical devices, quantum computing, energy, gyrotron development, and more. We pioneered cryogen-free magnet systems and build nearly everything in-house, seeing projects through from design to delivery.
The role
Alongside our magnet systems, we design and manufacture the electronic instruments that run them. Magnet power supplies, cryogenic temperature monitors, cryogen level meters, gaussmeters, and custom electronics for clients whose applications don't fit anything off the shelf.
This role owns that portfolio. You'll have the opportunity to maintain and advance the hardware, firmware, and/or host software across our instrument lines, carrying designs forward as components go obsolete, requirements change, and customers ask for capability that doesn't exist yet. You'll report to the Engineering Manager.
This is a broad role in a small company. The same person who traces a noise problem on a bench in the morning may be writing SCPI command handlers in the afternoon.
What you'll do
Design and revise analog, digital, and mixed-signal circuits for precision measurement and control instruments
Develop low-level embedded firmware for instrument control, measurement, and communication, including device drivers
Implement, maintain, and extend host-side software and instrument drivers used by our customers
Carry existing designs forward through component obsolescence, cost reduction, and capability upgrades
Design and build custom instrumentation for one-off customer applications
Support production, calibration, and end-of-line test for the instrument lines
Troubleshoot field returns and drive corrective action back into the design
Maintain schematics, PCB files, firmware repositories, and design documentation
Required Qualifications
Bachelor of Science in Electrical Engineering from an EAC/ABET-accredited program
5+ years of professional experience designing electronic products, ideally in an environment where you participated in either a full New Product Development (NPD) cycle or Engineering Validation Testing (EVT), Design Validation Testing (DVT), and Production Validation Testing (PVT) cycle
Demonstrated analog and mixed-signal circuit design, including precision measurement front ends, signal conditioning, and power regulation
Schematic capture and multilayer PCB layout in a professional EDA tool such as Altium or OrCAD
Embedded firmware development in C or C++ on microcontrollers, including peripheral configuration, bootstrap coding, real-time control loops, serial communication
Practical lab skill with oscilloscopes, DMMs, function generators, and power analyzers, and the debugging instinct to use them well
Strong Microsoft Office skills, particularly Excel for test data
Attention to detail that holds up in released schematics, firmware, and calibration procedures
Able to work on-site in Oak Ridge, TN full time
Preferred Qualifications
Experience with cryogenics, superconducting magnets, high vacuum, or low-temperature instrumentation
Precision measurement work, including low-noise design, four-wire sensing, high-resolution ADCs, precision references, and sensor linearization
Power electronics for programmable current sources or supplies, including regulation loops, thermal design, and protection circuitry
Instrument communication interfaces and command sets, such as SCPI over RS-232, USB, GPIB/IEEE-488, or Ethernet
EMI/EMC design practice and product safety compliance such as IEC 61010 or CE marking
Embedded firmware development
Experience taking over and modernizing designs
Git or comparable version control for both firmware and hardware
Practical LLM use in a technical context
Growth and tooling
You'll have real ownership here, and a product portfolio small enough to actually understand end to end. That combination is hard to find, and it's the reason engineers stay in roles like this. Superconducting magnet and cryogenic measurement work also builds domain expertise that few employers can teach. We encourage practical use of our internal AI tooling for design, firmware, and documentation work, within defined procedures for handling proprietary design data. Performance is reviewed at six months, at twelve months, and annually after that, with pay and responsibilities moving alongside demonstrated capability.
Compensation and benefits
Salary is dependent on experience, full-time exempt. Health, dental, vision and life insurance, 401(k) contribution matching, and a competitive PTO policy.
Send your resume and cover letter to [email protected]. This is the preferred application method over applying directly on LinkedIn.
Show more Show less