LS
Lead Avionics Electrical Design Engineer
Accepting applicationsLanteris Space Systems · San Jose, CA
Full-Time Senior EthernetFPGAaiatemixed signal
Posted
3d ago
Category
Test
Experience
Senior
Country
United States
Please review the job details below.
Lanteris Space Systems is seeking a Lead Avionics Electrical Design Engineer, with a focus on digital electronics and firmware design, to join our Bus Electronics Design team. This is a hands-on, on-site position located in San Jose, CA.
The Bus Electronics team is responsible for the design, verification, and manufacturing support for the electronics that enable our reputable, reliable, high-powered spacecraft. Our spacecraft span pLEO to deep space, enabling national defense, earth observation & communications, and interplanetary space exploration such as NASA’s Psyche Discovery Program and SR-1 Freedom mission to Mars.
In this role, you will act as the engineering focal for one or several avionics units for different Lanteris Space products, with an emphasis in proliferated LEO (pLEO) constellations applications. Collaborating closely with a cohort of electrical, mechanical, test and system engineers, you will develop electrical schematics, firmware code, PCB board layouts, specifications and execute test activities in the laboratory. You will provide technical leadership and provide guidance to other engineers to complete the overall design of the Bus Electronics units. This is an exciting opportunity to be the owner from concept to verification, production and operation of avionics hardware for space applications.
Responsibilities
Subject Matter Expert of one or several avionics units, down to the component and firmware level, with also an understanding of its interfaces to the system level.
Provide technical leadership and make recommendations to system trades, requirements capture, and design choices and implications, in an often ambiguous design space.
Proactive ownership of hardware through design, production, satellite integration, and on-orbit performance.
Design, analyze, and test digital electronics hardware for use in spacecraft applications. Hands-on prototyping and bring up of designs.
Documentation of engineering test and qualification plans, execute hardware validation through benchtop and environmental testing, troubleshooting and root cause investigations of anomalous circuit behavior.
Develop and manage electrical schematics, PCB layouts, and firmware.
Collaborate with entire cross-functional team (mechanical, thermal, software/firmware, test engineering, supply chain, etc.) to drive project success.
Support Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), Technical Interchange Meeting (TIM), with customers and internal stakeholders.
Minimum Requirements
Must be a U.S. citizen or permanent resident
Bachelor's degree in electrical engineering, aerospace engineering, physics, mathematics, computer science or a related field, with 8 years of experience minimum
Proficiency in the design, simulation, analysis, and test of digital electronics circuits, including microprocessors, microcontrollers, FPGA, System on Chip; high speed communication such as SpaceWire, Ethernet, CAN, RS-422/485; and/or firmware development.
Proficiency in schematics and circuit board layout considerations for digital and mixed signal electronics, including high speed communications.
Experience with analysis methods such as circuit stress, derating, and worst-case analysis
Experience writing and reviewing firmware code.
Experience collaboratively working to meet the concerns of adjacent disciplines, such as thermal, mechanical, reliability, manufacturing, and test.
Hands-on experience with verification & validation (V&V), qualification testing, and troubleshooting at both the hardware and software levels.
Additional Desired Qualifications
15 years of relevant experience, including experience leading electrical engineering designs through the full lifecycle.
Exposure to Radiation Hardened (Rad Hard) designs; single event effects (SEE) and mitigation analysis / methods.
Design considerations for reliability, redundancy, FMECA, and radiation effects in a space environment.
Familiarity with OpenVPX and SpaceVPX standards.
Self motivated, attention to detail, with proactive problem-solving and communication skills, and the ability to work both independently and collaboratively.
Knowledge of Design for excellence (DFX).
The base pay for this position at the lead level (based on years of experience) within California is: $123,000.00 - $205,000.00 annually.
The base pay for this position at the principal level (based on years of experience) within California is: $151,000.00 - $251,000.00 annually.
In support of pay transparency at Lanteris Space Systems, we disclose salary ranges on all U.S. job postings. The successful candidate’s starting pay will fall within the salary range provided below and is determined based on job-related factors, including, but not limited to, the experience, qualifications, knowledge, skills, geographic work location, and market conditions. Candidates with the minimum necessary experience, qualifications, knowledge, and skillsets for the position should not expect to receive the upper end of the pay range.
The base pay for this position within California is: $123,000.00 - $205,000.00 annually.
For all other states, we use geographic cost of labor as an input to develop market-driven ranges for our roles, and as such, each location where we hire may have a different range.
We offer a comprehensive package of benefits including paid time off, health and welfare insurance, and 401(k) to eligible employees. More information on our benefits will be shared with candidates as they move forward in the recruitment process.
Additionally, this position is incentive eligible with a target based on contribution, company performance, and/or individual results achieved; the specific incentive plan and target amount will be determined based on the role and breadth of contributions.
The application window is three days from the date the job is posted and will remain posted until a qualified candidate has been identified for hire. If the job is reposted regardless of reason, it will remain posted three days from the date the job is reposted and will remain reposted until a qualified candidate has been identified for hire.
The date of posting can be found on the Lanteris Space Systems Career page at the top of each job posting.
To apply, submit your application via the Lanteris Space Systems Career page.
Lanteris Space Systems values diversity in the workplace and is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.
Show more Show less
Lanteris Space Systems is seeking a Lead Avionics Electrical Design Engineer, with a focus on digital electronics and firmware design, to join our Bus Electronics Design team. This is a hands-on, on-site position located in San Jose, CA.
The Bus Electronics team is responsible for the design, verification, and manufacturing support for the electronics that enable our reputable, reliable, high-powered spacecraft. Our spacecraft span pLEO to deep space, enabling national defense, earth observation & communications, and interplanetary space exploration such as NASA’s Psyche Discovery Program and SR-1 Freedom mission to Mars.
In this role, you will act as the engineering focal for one or several avionics units for different Lanteris Space products, with an emphasis in proliferated LEO (pLEO) constellations applications. Collaborating closely with a cohort of electrical, mechanical, test and system engineers, you will develop electrical schematics, firmware code, PCB board layouts, specifications and execute test activities in the laboratory. You will provide technical leadership and provide guidance to other engineers to complete the overall design of the Bus Electronics units. This is an exciting opportunity to be the owner from concept to verification, production and operation of avionics hardware for space applications.
Responsibilities
Subject Matter Expert of one or several avionics units, down to the component and firmware level, with also an understanding of its interfaces to the system level.
Provide technical leadership and make recommendations to system trades, requirements capture, and design choices and implications, in an often ambiguous design space.
Proactive ownership of hardware through design, production, satellite integration, and on-orbit performance.
Design, analyze, and test digital electronics hardware for use in spacecraft applications. Hands-on prototyping and bring up of designs.
Documentation of engineering test and qualification plans, execute hardware validation through benchtop and environmental testing, troubleshooting and root cause investigations of anomalous circuit behavior.
Develop and manage electrical schematics, PCB layouts, and firmware.
Collaborate with entire cross-functional team (mechanical, thermal, software/firmware, test engineering, supply chain, etc.) to drive project success.
Support Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), Technical Interchange Meeting (TIM), with customers and internal stakeholders.
Minimum Requirements
Must be a U.S. citizen or permanent resident
Bachelor's degree in electrical engineering, aerospace engineering, physics, mathematics, computer science or a related field, with 8 years of experience minimum
Proficiency in the design, simulation, analysis, and test of digital electronics circuits, including microprocessors, microcontrollers, FPGA, System on Chip; high speed communication such as SpaceWire, Ethernet, CAN, RS-422/485; and/or firmware development.
Proficiency in schematics and circuit board layout considerations for digital and mixed signal electronics, including high speed communications.
Experience with analysis methods such as circuit stress, derating, and worst-case analysis
Experience writing and reviewing firmware code.
Experience collaboratively working to meet the concerns of adjacent disciplines, such as thermal, mechanical, reliability, manufacturing, and test.
Hands-on experience with verification & validation (V&V), qualification testing, and troubleshooting at both the hardware and software levels.
Additional Desired Qualifications
15 years of relevant experience, including experience leading electrical engineering designs through the full lifecycle.
Exposure to Radiation Hardened (Rad Hard) designs; single event effects (SEE) and mitigation analysis / methods.
Design considerations for reliability, redundancy, FMECA, and radiation effects in a space environment.
Familiarity with OpenVPX and SpaceVPX standards.
Self motivated, attention to detail, with proactive problem-solving and communication skills, and the ability to work both independently and collaboratively.
Knowledge of Design for excellence (DFX).
The base pay for this position at the lead level (based on years of experience) within California is: $123,000.00 - $205,000.00 annually.
The base pay for this position at the principal level (based on years of experience) within California is: $151,000.00 - $251,000.00 annually.
In support of pay transparency at Lanteris Space Systems, we disclose salary ranges on all U.S. job postings. The successful candidate’s starting pay will fall within the salary range provided below and is determined based on job-related factors, including, but not limited to, the experience, qualifications, knowledge, skills, geographic work location, and market conditions. Candidates with the minimum necessary experience, qualifications, knowledge, and skillsets for the position should not expect to receive the upper end of the pay range.
The base pay for this position within California is: $123,000.00 - $205,000.00 annually.
For all other states, we use geographic cost of labor as an input to develop market-driven ranges for our roles, and as such, each location where we hire may have a different range.
We offer a comprehensive package of benefits including paid time off, health and welfare insurance, and 401(k) to eligible employees. More information on our benefits will be shared with candidates as they move forward in the recruitment process.
Additionally, this position is incentive eligible with a target based on contribution, company performance, and/or individual results achieved; the specific incentive plan and target amount will be determined based on the role and breadth of contributions.
The application window is three days from the date the job is posted and will remain posted until a qualified candidate has been identified for hire. If the job is reposted regardless of reason, it will remain posted three days from the date the job is reposted and will remain reposted until a qualified candidate has been identified for hire.
The date of posting can be found on the Lanteris Space Systems Career page at the top of each job posting.
To apply, submit your application via the Lanteris Space Systems Career page.
Lanteris Space Systems values diversity in the workplace and is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.
Show more Show less