GS
Design Engineer
Accepting applicationsGardner Standard LLC · Kent, WA
Full-Time Entry ATEMentorSICaiate
Posted
14 May
Category
Test
Experience
Entry
Country
United States
Design Engineer Pacific Aero Tech – A Gardner Standard Portfolio Company
Location: Kent, WA
Department: Engineering
Reports To: Director of Engineering
About the Opportunity
Gardner Standard is supporting one of its portfolio companies, Pacific Aero Tech, in the search for a hands-on Design Engineer to support advanced aerospace repair development and FAA-certified engineering programs.
Pacific Aero Tech (PAT) is an FAA Part 145 Repair Station specializing in aerospace transparencies and advanced repair development. This role is not a support engineer position. The Design & R&D Engineer is fully accountable for designing, leading, and delivering FAA-approved DER development programs for new and existing aircraft window repairs from concept definition through certification, production release, and sustainment.
This engineer will own technical direction, drive R&D experimentation, author and defend substantiation, and deliver compliant engineering data packages that enable PAT to launch new repair capabilities and scale production safely and profitably.
This role requires strong judgment, regulatory fluency, hands-on experimentation capability, and the ability to work independently in a Part 145 environment.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
1. DER Program Ownership (End-to-End)
Lead full lifecycle DER development programs for new repair designs and processes:
Problem definition and certification strategy
Experimental design and test planning
Tooling and fixture design
Data generation, analysis, and substantiation
FAA-compliant documentation and approval support
Serve as the technical focal point between PAT, DERs, FAA, suppliers, and internal stakeholders.
Ensure engineering data meets 14 CFR, FAA guidance, airworthiness, and safety requirements for Part 145 repairs.
Maintain audit-ready documentation and traceability throughout the program lifecycle.
2. Research, Experimentation & Technical Development
Design and execute R&D experiments to validate new repair methods, materials, tooling, and processes.
Build and test prototype parts, assemblies, and fixtures; analyze results and iterate designs.
Develop and validate process parameters (thermal, mechanical, material, electrical as applicable).
Translate experimental outcomes into repeatable, production-ready engineering solutions.
3. Engineering Design & Substantiation
Produce engineering drawings, models, and data packages using SolidWorks.
Apply GD&T per ASME Y14.5 to all critical features and interfaces.
Define specifications, acceptance criteria, and standards for repair processes and tooling.
Support or author engineering substantiation, including test reports, analysis, and compliance narratives.
4. FAA Part 145 Integration & Production Enablement
Convert approved DER data into shop-floor-ready work instructions, inspection criteria, and training materials.
Support production during initial implementation and ramp-up of new repairs.
Troubleshoot technical issues in manufacturing and drive corrective engineering actions.
Ensure new designs are robust, repeatable, auditable, and cost-effective.
5. Technical Leadership & Judgment
Operate with high independence and sound engineering judgment.
Mentor technicians and junior engineers on design intent, process discipline, and compliance.
Drive decisions using data, risk assessment, and regulatory awareness—not trial-and-error guessing.
QUALIFICATIONS:
Required
Bachelor’s degree in Mechanical, Materials, Aerospace, or Electrical Engineering (ABET-accredited).
5+ years of hands-on engineering experience in aerospace, preferably in Part 145 or Part 21 environments.
Demonstrated experience leading R&D or certification-driven engineering projects, not just supporting them.
Strong proficiency in SolidWorks and engineering documentation.
Working knowledge of FAA regulations, DER processes, and conformity expectations.
Proven ability to design experiments, analyze results, and defend technical conclusions.
Comfortable working in manufacturing, lab, and shop environments.
Preferred
Existing FAA DER designation (Structures, Repairs, or Systems), or strong eligibility path.
Experience with aerospace transparencies, bonded structures, or complex assemblies.
Prior responsibility for authoring or defending substantiation data.
Experience translating R&D outcomes into certified, production-released repairs.
PHYSICAL AND WORK REQUIREMENTS
Combination of office, laboratory, and manufacturing environments.
Regular hands-on work with tools, fixtures, prototype hardware, and test setups.
Ability to lift up to 40 lbs and work around chemicals, heat, and production equipment.
Compliance with all PAT safety, quality, and FAA regulatory requirements.
WASHINGTON STATE & FEDERAL COMPLIANCE STATEMENTS
Americans with Disabilities Act (ADA) & Washington Law Against Discrimination (WLAD)
Pacific Aero Tech provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and Washington State Law Against Discrimination (WLAD – RCW 49.60).
Employees who need accommodation to perform essential job functions are encouraged to notify Human Resources.
Equal Employment Opportunity (EEO)
Pacific Aero Tech is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, national origin, sex, pregnancy, sexual orientation, gender identity, marital status, ancestry, veteran or military status, disability, genetic information, age, or any other protected status under federal law (Title VII, ADA, ADEA) or Washington State law (RCW 49.60).
Harassment-Free Workplace Statement
The Company prohibits unlawful harassment, discrimination, and retaliation in accordance with Title VII, EEOC regulations, and Washington State Human Rights Commission (WSHRC) standards.
Washington Pay Transparency Compliance (RCW 49.58)
In accordance with Washington State’s Equal Pay & Opportunities Act, salary ranges and benefit information will be provided in job postings for this role.
At-Will Employment
Employment with Pacific Aero Tech is at-will, consistent with Washington State employment law, and may be terminated by either the employee or the Company at any time for any lawful reason.
Drug-Free Workplace
Pacific Aero Tech maintains a drug-free work environment consistent with federal safety-sensitive regulations and Washington State law.
GENERAL EXPECTATIONS
All employees are expected to adhere to Company policies, uphold PAT values, and act as professional representatives of the organization while on duty.
Pay: $82,000.00 - $110,000.00 per year
Benefits:
401(k)
Dental insurance
Life insurance
Vision insurance
Work Location: In person
Show more Show less
Location: Kent, WA
Department: Engineering
Reports To: Director of Engineering
About the Opportunity
Gardner Standard is supporting one of its portfolio companies, Pacific Aero Tech, in the search for a hands-on Design Engineer to support advanced aerospace repair development and FAA-certified engineering programs.
Pacific Aero Tech (PAT) is an FAA Part 145 Repair Station specializing in aerospace transparencies and advanced repair development. This role is not a support engineer position. The Design & R&D Engineer is fully accountable for designing, leading, and delivering FAA-approved DER development programs for new and existing aircraft window repairs from concept definition through certification, production release, and sustainment.
This engineer will own technical direction, drive R&D experimentation, author and defend substantiation, and deliver compliant engineering data packages that enable PAT to launch new repair capabilities and scale production safely and profitably.
This role requires strong judgment, regulatory fluency, hands-on experimentation capability, and the ability to work independently in a Part 145 environment.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
1. DER Program Ownership (End-to-End)
Lead full lifecycle DER development programs for new repair designs and processes:
Problem definition and certification strategy
Experimental design and test planning
Tooling and fixture design
Data generation, analysis, and substantiation
FAA-compliant documentation and approval support
Serve as the technical focal point between PAT, DERs, FAA, suppliers, and internal stakeholders.
Ensure engineering data meets 14 CFR, FAA guidance, airworthiness, and safety requirements for Part 145 repairs.
Maintain audit-ready documentation and traceability throughout the program lifecycle.
2. Research, Experimentation & Technical Development
Design and execute R&D experiments to validate new repair methods, materials, tooling, and processes.
Build and test prototype parts, assemblies, and fixtures; analyze results and iterate designs.
Develop and validate process parameters (thermal, mechanical, material, electrical as applicable).
Translate experimental outcomes into repeatable, production-ready engineering solutions.
3. Engineering Design & Substantiation
Produce engineering drawings, models, and data packages using SolidWorks.
Apply GD&T per ASME Y14.5 to all critical features and interfaces.
Define specifications, acceptance criteria, and standards for repair processes and tooling.
Support or author engineering substantiation, including test reports, analysis, and compliance narratives.
4. FAA Part 145 Integration & Production Enablement
Convert approved DER data into shop-floor-ready work instructions, inspection criteria, and training materials.
Support production during initial implementation and ramp-up of new repairs.
Troubleshoot technical issues in manufacturing and drive corrective engineering actions.
Ensure new designs are robust, repeatable, auditable, and cost-effective.
5. Technical Leadership & Judgment
Operate with high independence and sound engineering judgment.
Mentor technicians and junior engineers on design intent, process discipline, and compliance.
Drive decisions using data, risk assessment, and regulatory awareness—not trial-and-error guessing.
QUALIFICATIONS:
Required
Bachelor’s degree in Mechanical, Materials, Aerospace, or Electrical Engineering (ABET-accredited).
5+ years of hands-on engineering experience in aerospace, preferably in Part 145 or Part 21 environments.
Demonstrated experience leading R&D or certification-driven engineering projects, not just supporting them.
Strong proficiency in SolidWorks and engineering documentation.
Working knowledge of FAA regulations, DER processes, and conformity expectations.
Proven ability to design experiments, analyze results, and defend technical conclusions.
Comfortable working in manufacturing, lab, and shop environments.
Preferred
Existing FAA DER designation (Structures, Repairs, or Systems), or strong eligibility path.
Experience with aerospace transparencies, bonded structures, or complex assemblies.
Prior responsibility for authoring or defending substantiation data.
Experience translating R&D outcomes into certified, production-released repairs.
PHYSICAL AND WORK REQUIREMENTS
Combination of office, laboratory, and manufacturing environments.
Regular hands-on work with tools, fixtures, prototype hardware, and test setups.
Ability to lift up to 40 lbs and work around chemicals, heat, and production equipment.
Compliance with all PAT safety, quality, and FAA regulatory requirements.
WASHINGTON STATE & FEDERAL COMPLIANCE STATEMENTS
Americans with Disabilities Act (ADA) & Washington Law Against Discrimination (WLAD)
Pacific Aero Tech provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and Washington State Law Against Discrimination (WLAD – RCW 49.60).
Employees who need accommodation to perform essential job functions are encouraged to notify Human Resources.
Equal Employment Opportunity (EEO)
Pacific Aero Tech is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, national origin, sex, pregnancy, sexual orientation, gender identity, marital status, ancestry, veteran or military status, disability, genetic information, age, or any other protected status under federal law (Title VII, ADA, ADEA) or Washington State law (RCW 49.60).
Harassment-Free Workplace Statement
The Company prohibits unlawful harassment, discrimination, and retaliation in accordance with Title VII, EEOC regulations, and Washington State Human Rights Commission (WSHRC) standards.
Washington Pay Transparency Compliance (RCW 49.58)
In accordance with Washington State’s Equal Pay & Opportunities Act, salary ranges and benefit information will be provided in job postings for this role.
At-Will Employment
Employment with Pacific Aero Tech is at-will, consistent with Washington State employment law, and may be terminated by either the employee or the Company at any time for any lawful reason.
Drug-Free Workplace
Pacific Aero Tech maintains a drug-free work environment consistent with federal safety-sensitive regulations and Washington State law.
GENERAL EXPECTATIONS
All employees are expected to adhere to Company policies, uphold PAT values, and act as professional representatives of the organization while on duty.
Pay: $82,000.00 - $110,000.00 per year
Benefits:
401(k)
Dental insurance
Life insurance
Vision insurance
Work Location: In person
Show more Show less
Similar Jobs
M
New College Grad - DRAM Product Reliability Characterization Engineer
Micron · Boise, United States, North America
K
Business Development Manager - Strategic Business Unit
KLA · Milpitas, United States, North America
I
Graduate Talent (GenAI Software Solutions Engineer)
Intel · Penang, Malaysia, Asia
AM
Material Handler III
Applied Materials · Austin, United States, North America